Publications

Refereed Journals (by research area)

Abrasive Jet Micromachining
  1. J. Palumbo, M. Navi, S Tsai, J.K Spelt, and M. Papini, Inertial Particle Separation in Helical Channels: A Calibrated Numerical Analysis, AIP Advances, 10, (2020), 125101.
  2. J. Palumbo, M. Navi, S.H. Tsai, J.K. Spelt, M. Papini, Lab on a Rod: Size-based Particle Separation and Sorting in a Helical Channel, Biomicrofluidics 14, (2020), 064104.
  3. S. Shafagh, M. Papini, The effects of blast lag in abrasive jet machined micro-channel intersections, Precision Engineering, 62, (2020), 162-169.
  4. X. Luo, J. Palumbo, M. Papini, J.K. Spelt, Aerodynamic Focusing of an Abrasive Air Jet and its Effect on Machining Resolution, International Journal of Machine Tools and Manufacture, 143, (2019), 92-106.
  5. A. Ghazavi, M. Papini An Inverse Method for the Abrasive Jet Micro-machining of High Aspect Ratio Channels of Desired Topography – Part I, Theory, Precision Engineering, 58, (2019), 57-69.
  6. A. Ghazavi, M. Papini, An Inverse Method for the Abrasive Jet Micro-machining of High Aspect Ratio Channels of Desired Topography – Part II, Experiments, Precision Engineering, 58, (2019), 25-34.
  7. A. Nouhi, J.K. Spelt, M. Papini, Abrasive jet turning of glass and PMMA rods and the micro-machining of helical channels, Precision Engineering, 53, (2018), 151-162.
  8. F. Ahmadzadeh, S. S. H. Tsai, M. Papini, Effect of curing parameters and configuration on the efficacy of ultraviolet light curing self-adhesive masks used for abrasive jet micro-machining, Precision Engineering, 49, (2017), 354-364
  9. M.R. Sookhak Lari, A. Ghazavi, M. Papini, A rotating mask system for sculpting of three-dimensional features using abrasive jet micro-machining, Journal of Materials Processing Technology, 243, (2017), 62-74
  10. K. Kowsari, A. Nouhi, V. Hadavi, J.K. Spelt, M. Papini, Prediction of the erosive footprint in the abrasive jet micro-machining of flat and curved glass, Tribology International, 106, (2017), 101-108
  11. R. Jafar, V. Hadavi, J.K. Spelt, M. Papini, Dust Reduction in Abrasive Jet Micro-machining Using Liquid Films, Powder technology 301, (2016), 1270-1274.
  12. A. Nouhi, K. Kowsari, J.K. Spelt, M. Papini, Abrasive jet machining of channels on highly-curved glass and PMMA surfaces, Wear, 356–357, (2016), 30–39.
  13. M.R. Sookhak Lari, M. Papini, Inverse methods to gradient etch three-dimensional features with prescribed topographies using abrasive jet micro-machining: Part I – Modelling, Precision Engineering, 45, (2016), 272–284.
  14. M.R. Sookhak Lari, M. Teti, M. Papini, Inverse methods to gradient etch three-dimensional features with prescribed topographies using abrasive jet micro-machining: Part II – Verification with micro-machining experiments, Precision Engineering, 45, (2016), 262–271.
  15. A. Nouhi, M.R. Sookhak Lari, J.K. Spelt, M. Papini, Implementation of a shadow mask for direct writing in abrasive jet micro-machining, Journal of materials processing technology 223, (2015), 232–239.
  16.  R. Jafar, J.K. Spelt, M. Papini, Surface finishing of micro-channels using low kinetic energy abrasives, International journal of mechanical engineering and mechatronics 2, (2014), 43-50.
  17.  A. G Gradeen, M. Papini, J.K. Spelt, The effect of temperature on the cryogenic abrasive jet micro-machining of polytetrafluoroethylene, high carbon steel and polydimethylsiloxane, Wear 317 (1–2), (2014), 170–178.
  18. R. Jafar, M. Papini, and J.K. Spelt, Simulation of erosive smoothing in the abrasive jet micro-machining of glass, Journal of Materials Processing Technology 213 (12), (2013), 2254–2261.
  19. R. Jafar, J.K. Spelt, and M. Papini, Numerical simulation of surface roughness and erosion rate of abrasive jet micro-machined channels, Wear 303 (1-2), (2013), 302-312.
  20. R. Jafar, J.K. Spelt, and M. Papini, Surface roughness and erosion rate of abrasive jet micro-machined channels: Experiments and analytical model, Wear 303 (1-2), (2013), 138-145.
  21. S. Ally, J.K. Spelt, and M. Papini, Prediction of Machined Surface Evolution in the Abrasive Jet Micro-machining of Metals, Wear, 292–293, (2012), 89–99.
  22. T. Burzynski and M. Papini, A level set methodology for predicting the effect of mask wear on surface evolution of features in abrasive jet micro-machining, Journal of Micromechanics and Microengineering, 22 (7), 075001 (22 pp).
  23. T. Burzynski and M. Papini, Modelling of surface evolution in abrasive jet micro-machining including particle second strikes: A level set methodology, Journal of Materials Processing Technology, 212 (5), (2012), 1177–1190.
  24. A. Ghobeity, H.J. Crabtree, M.Papini, and J.K. Spelt, Characterisation and comparison of microfluidic chips formed using abrasive jet micromachining and wet etching, Journal of Micromechanics and Microengineering, 22 (2), (2012), 025014 (10 pp).
  25. A.G. Gradeen, J. K. Spelt, and M. Papini, Cryogenic abrasive jet machining of polydimethylsiloxane at different temperatures, Wear, 274–275, (2012), 335–344.
  26. D. Dehnadfar, J. Friedman, and M. Papini, Laser shadowgraphy measurements of abrasive particle spatial, size and velocity distributions through micro-masks used in abrasive jet micro-machining, Journal of Materials Processing Technology, 212 (1), (2012), 137–149.
  27. D. Ciampini and M. Papini, A cellular-automata and particle-tracking simulation of abrasive jet micromachining of polymethyl-methacrylate, Journal of Micromechanics and Microengineering, 21 (8), (2011), 085022 (11 pp).
  28. H. Getu, J.K. Spelt and M. Papini, Thermal Analysis of Cryogenically Assisted Abrasive Jet Micromachining of PDMS, International Journal of Machine Tools and Manufacture, 51 (9), (2011), 721-730.
  29. T. Burzynski and M. Papini, A level set methodology for predicting the surface evolution of inclined masked micro-channels resulting from abrasive jet micro-machining at oblique incidence, International Journal of Machine Tools and Manufacture, 51 (7-8), (2011), 628-641.
  30. T. Burzynski and M. Papini, Measurement of the particle spatial and velocity distributions in micro-abrasive jets, Measurement Science and Technology, 22, (2011), 025104.
  31. T. Burzynski and M. Papini, Level set methods for the modelling of surface evolution in the abrasive jet micromachining of features used in MEMS and microfluidic devices, Journal of Micromechanics and Microengineering, 20, (2010), 085004.
  32. D. Ciampini and M. Papini, A cellular automata and particle-tracking simulation of abrasive jet micromachining that accounts for particle spatial hindering and second strikes, Journal of Micromechanics and Microengineering, 20, (2010), 045025.
  33. V. Ivantsiv, J.K. Spelt, and M. Papini, Mass flow rate measurement in abrasive jets using acoustic emission, Measurement Science and Technology, 20, (2009), 095402.
  34. A. Ghobeity, D. Ciampini, and M. Papini, An analytical model of the effect of particle size distribution on the surface profile evolution in abrasive jet micromachining, Journal of Materials Processing Technology, Vol. 209, Issue 20, (2009),6067-6077.
  35. A. Ghobeity, M. Papini, and J.K. Spelt, Abrasive jet micro-machining of planar areas and transitional slopes in glass using target oscillation, Journal of Materials Processing Technology, 209 (11), (2009), 5123-5132.
  36. N. Shafiei, H. Getu, A. Sadeghian, and M. Papini, Computer simulation of developing abrasive jet machined profiles including particle interference, Journal of Materials Processing Technology, 209 (9), (2009), 4366-4378.
  37. H. Getu, J.K. Spelt, and M. Papini, Cryogenically assisted abrasive jet micromachining of polymers, Journal of Micromechanics and Microengineering, 18 (2008), 115010.
  38. A.Ghobeity, J.K. Spelt, and M. Papini, Abrasive jet micro-machining of planar areas and transitional slopes, Journal of Micromechanics and Microengineering, 18, (2008), 055014.
  39. H. Getu, A. Ghobeity, J.K. Spelt, and M. Papini, Abrasive jet micromachining of acrylic and polycarbonate polymers at oblique angles of attack, Wear, Volume 265, Issues 5-6, (2008), 888-901.
  40. A. Ghobeity, T. Krajac, T. Burzynski, M. Papini, and J. K. Spelt, Surface evolution models in abrasive jet micromachining, Wear, 264 (3-4), (2008), 185-198.
  41. A. Ghobeity, H. Getu, M. Papini and J.K. Spelt, Surface evolution models for abrasive jet micromachining of holes in glass and polymethylmethacrylate (PMMA), Journal of Micromechanics and Microengineering, 17 (2007), 2175-2185.
  42. A. Ghobeity, H. Getu, T. Krajac, J. K. Spelt and M. Papini, Process repeatability in abrasive jet micro-machining, Journal of Materials Processing Technology, 190 (1-3), (2007), 51-60.
  43. H. Getu, A. Ghobeity. J.K. Spelt, and M. Papini, Abrasive jet micromachining of polymethylmethacrylate, Wear 263 (7-12) (2007), 1008-1015.
  44. A. Ghobeity. M. Papini, and J.K. Spelt, Computer simulation of particle interference in abrasive jet micromachining, Wear 263 (1-6), (2007), 265-269.
Abrasive Water Jet Micromachining
  1. A. Ibrahim and M. Papini, Controlled depth micro-abrasive waterjet milling of aluminum oxide to fabricate micro-molds containing intersecting free-standing structures, Precision Engineering 75, (2022), 24-36.
  2. E. Azarsa, M. Jeyhani, A. Ibrahim, .S. H. Tsai, M. Papini, A novel abrasive water jet machining technique for rapid fabrication of three-dimensional microfluidic components, Biomicrofluidics 14,(2020), 044103.
  3. E. Azarsa, L. Cinco, M. Papini, Fabrication of high aspect ratio free-standing structures using abrasive water jet micro-machining, Journal of Materials Processing Technology, 275, (2020), 116318.
  4. N. Haghbin, F. Ahmadzadeh, M. Papini, Masked micro-channel machining in aluminum alloy and borosilicate glass using abrasive water jet micro-machining, Journal of Manufacturing Processes, 35, (2018), 307-316.
  5. N. Haghbin, A. Khakpour, J. Schwartzentruber, M. Papini, Measurement of abrasive particle velocity and size distribution in high pressure abrasive slurry and water micro-jets using a modified dual disc anemometer, Journal of Materials Processing Technology, 263, (2019), 164-175.
  6. J. Schwartzentruber, M.Papini, and J.K. Spelt,  Characterizing and Modelling Delamination of Carbon-Fiber Epoxy Laminates during Abrasive Waterjet Cutting, Composites Part A, 112, (2018), 299-314.
  7. J. Schwartzentruber, J.K. Spelt, and M. Papini, Modelling of Delamination due to Hydraulic Shock when Piercing Anisotropic Carbon-Fiber Laminates using an Abrasive Waterjet, International Journal of Machine Tools and Manufacture, 132, (2018), 81-95.
  8. J. Schwartzentruber, J.K. Spelt, and M. Papini, Prediction of Surface Roughness in Abrasive Waterjet Trimming of Fiber Reinforced Polymer Composites, International Journal of Machine Tools and Manufacture, 122, (2017), 1-17.
  9. N. Haghbin, J.K. Spelt, M. Papini, Abrasive waterjet micro-machining of channels in metals: Model to predict high aspect-ratio channel profiles for submerged and unsubmerged machining, Journal of materials processing technology, 222 (2015), 399–409.
  10. J. Schwartzentruber, M. Papini, Abrasive waterjet micro-piercing of borosilicate glass, Journal of materials processing technology, 219 (2015), 143–154.
  11. N. Haghbin, J.K. Spelt, M.Papini, Modeling eroded topography in masked abrasive slurry jet pocket milling, International journal of machine tools and manufacture, 88, (2015), 108–117.
Abrasive Slurry Jet Micromachining
  1. M. Moghaddam, M. Papini, Modeling eroded topography in masked abrasive slurry jet pocket milling, International Journal of Mechanical Sciences, accepted, Nov 2024
  2. M. Moghaddam, M. Papini, Topography prediction of high-aspect ratio features milled with overlapping abrasive slurry jet footprints considering fluid confinement effects, International Journal of Machine Tools and Manufacture, 197, (2024), 104145
  3. M. Moghaddam, I. Hajiyev, M. Papini, Prediction and mechanism of surface evolution in high-pressure slurry jet micro-machining of channels, Precision Engineering 82, (2023), 251-269.
  4. E. Azarsa, A. Ibrahim, M. Papini, Abrasive water and slurry jet micro-machining techniques for fabrication of molds containing raised free-standing micro-features, Precision Engineering, 65, (2020), 197-215
  5. E. van Wijk, D.F. James, M. Papini, J.K. Spelt, Micro-machining with Abrasive Slurry-Jets: Effects of Dissolved Polymer Concentration and Nozzle Design, International Journal of Advanced Manufacturing Technology 102 (1–4) (2019), 317–331.
  6. M. Teti, J.K. Spelt, and M. Papini, Jet properties and mixing chamber flow in a high-pressure abrasive slurry jet: Part II- Machining rates and CFD modeling”, International Journal of Advanced Manufacturing Technology, 101 (9–12) (2019), 3021–3034..
  7. M. Teti, J.K. Spelt, and M. Papini, Jet properties and mixing-chamber flow in a high-pressure abrasive slurry jet: Part I- Measurement of jet and chamber conditions, Journal of Advanced Manufacturing Technology, 99 (5-8), (2018), 1283–1291.
  8. K. Kowsari, M. Papini, JK Spelt, Selective removal of metallic layers from sintered ceramic and metallic plates using abrasive slurry-jet micro-machining, Journal of Manufacturing Processes, 29, (2017), 252-264.
  9. K. Kowsari, J. Schwartzentruber, J.K. Spelt, M. Papini, Erosive Smoothing of Abrasive Slurry-Jet Micro-machined Channels in Glass, PMMA, and Sintered ceramics: Experiments and Roughness Model, Precision Engineering, 49, (2017), 332-343.
  10. K. Kowsari, M. Papini, JK Spelt, The Effects of Fluid Vapor Pressure and Viscosity on the Shapes of Abrasive Slurry-jet Micro-machined Holes and Channels, International Journal of Machine Tools and Manufacture 110, (2016), 80–91.
  11. H. Nouraei, K. Kowsari, J.K. Spelt, and M. Papini, Calibrated CFD erosion modeling of abrasive slurry jet micro-machining of channels in ductile materials, Journal of Manufacturing Processes, 23, (2016), 90–101.
  12. K. Kowsari, H. Nouraei, B. Samareh, M. Papini, J.K. Spelt, CFD-aided prediction of the shape of abrasive slurry jet micro-machined channels in sintered ceramics, Ceramics International 42 (6), (2016), 7030–7042.
  13. K. Kowsari, M.R. Sookhak Lari, H. Nouraei, M. Papini, J.K. Spelt, Hybrid erosive jet micro-milling of sintered ceramic wafers with and without copper-filled through-holes, Journal of materials processing technology 230, (2016), 198–210.
  14. H Nouraei, K. Kowsari, M. Papini, J.K. Spelt, Operating parameters to minimize feature size in abrasive slurry jet micro-machining, Precision Engineering 44, (2016), 109–123.
  15. N Haghbin, F Ahmadzadeh, JK Spelt, M Papini, Effect of entrained air in abrasive water jet micro-machining: Reduction of channel width and waviness using slurry entrainment, Wear 344–345, (2015), 99–109.
  16. N. Haghbin, F. Ahmadzadeh, J.K. Spelt, and M. Papini, High pressure abrasive slurry jet micro-machining using slurry entrainment, Journal of Advanced Manufacturing Technology, (2015), 1-13.
  17. N. Tamannaee, JK Spelt, and M. Papini, Abrasive Slurry Jet Micro-machining of Edges, Planar Areas and Transitional Slopes in a Talc-Filled Co-Polymer, Precision Engineering 43, (2016), 52–62.
  18. R. Jafar, M. Papini and J.K. Spelt, Erosion modeling in abrasive slurry jet micro-machining of brittle materials, Journal of Manufacturing Processes, 17 (2015), 127–140.
  19. K. Kowsari, H. Nouraei, D.F. James, J.K. Spelt, and M. Papini, Abrasive Slurry Jet Micro-machining of Holes in Brittle and Ductile Materials. Journal of Materials Processing Technology  214 (9), (2014), 1909–1920.
  20. K. Kowsari, D.F. James, M. Papini, and J.K. Spelt, The effects of dilute polymer solution elasticity and viscosity on abrasive slurry jet micro-machining of glass, Wear 309 (1–2), (2014), 112–119.
  21. H. Nouraei, K. Kowsari, J.K. Spelt, and M. Papini, Surface evolution models for abrasive slurry jet micro-machining of channels and holes in glass,  Wear 309 (1–2), (2014), 65–73.
  22. H. Nouraei, A. Wodoslawsky, M. Papini, and J.K. Spelt, Characteristics of abrasive slurry jet micro-machining: A comparison with abrasive air jet micro-machining, Journal of Materials Processing Technology 213 (10), (2013), 1711–1724.
Electrochemical Slurry Jet Micromachining
  1. Z. Liu, H. Nouraei, J.K. Spelt, M. Papini, Electrochemical slurry jet micro-machining of tungsten carbide with a sodium chloride solution, Precision Engineering, 40, (2015), 189–198.
  2. Z. Liu, H. Nouraei, M. Papini, J.K. Spelt, Abrasive Enhanced Electrochemical Slurry Jet Micro-machining: Comparative Experiments and Synergistic Effects, Journal of Materials Processing Technology 214 (9), (2014), 1886–1894.
Solid Particle Erosion Testing and Modeling
  1. M. M. Nekahi, E. V. Vazquez, M. Papini, Prediction of the gradual solid particle erosion of particulate-reinforced epoxy-matrix composites using surface evolution modeling, Tribology International 193, (2024), 109422.
  2. W. Wang, M.J.R Haché, C. Cheng, T. Lyu, Z. Liu, M. Papini, Y. Zou, Solid-particle erosion of a dual-phase AlCoFeNi2 high-entropy alloy, Wear 528–529, (2023), 204971.
  3. M.M. Nekahi, E. V. Vazquez, M. Papini, Numerical modeling of the erosion of alumina particulate reinforced epoxy-matrix composites: Material removal mechanisms including reinforcement fracture, Wear 522, (2023), 204710.
  4. M.M. Nekahi, E. V. Vazquez, M. Papini, Numerical Simulation of Solid Particle Erosion of Alumina by Overlapping Irregular-shaped Particle Impacts, Tribology Letters 70, (2022) 50.
  5. N.H. Arani, M. Eghbal, M. Nekahi, M. Papini, Numerical and experimental investigation of the erosion of zirconia particulate-reinforced epoxy matrix composites by angular silicon carbide particles, Polymer Composites, 42, (2021), 220–235.
  6. N.H. Arani, M. Eghbal, M. Papini, Modeling the solid particle erosion of rubber particulate-reinforced epoxy, Tribology International, 153, (2021), 106656.
  7. N.H. Arani, M. Eghbal, M. Papini, Numerical simulation of solid particle erosion of epoxy by overlapping angular particle impacts. Tribology Letters, 68, 66 (2020).
  8. N.H. Arani, W. Rabba, and M. Papini, Solid particle erosion of epoxy matrix composites reinforced by Al2O3 spheres, Tribology International 136, (2019), 432-445.
  9. V. Hadavi, N.H. Arani, and M. Papini, Numerical and experimental investigations of particle embedment during the incubation period in the solid particle erosion of ductile materials, Tribology International, 129, (2019), 38-45.
  10. V. Hadavi, C.E. Moreno, and M. Papini, Numerical and experimental analysis of particle fracture during solid particle erosion, Part I: Modeling and experimental verification, Wear, 356–357, (2016), 135–145.
  11. V. Hadavi, C.E. Moreno, and M. Papini, Numerical and Experimental Analysis of Particle Fracture during Solid Particle Erosion, Part II: Effect of Incident Angle, Velocity and Abrasive Size, Wear, 356–357, (2016), 146–157.
  12. V. Hadavi and M. Papini, Numerical modeling of particle embedment during solid particle erosion of ductile materials, Wear 342–343, (2015), 310–321.
  13. V Hadavi, B Michaelsen, and M. Papini, Measurements and modeling of instantaneous particle orientation within abrasive air jets and implications for particle embedding, Wear 336–337, (2015), 9–20.
  14. M. Takaffoli and M. Papini, Numerical simulation of solid particle impacts on Al6061-T6, Part II: Material Removal Mechanisms for Impact of Multiple Angular Particles, Wear, 296 (1–2), (2012), 648–655.
  15. M. Takaffoli and M. Papini, Numerical simulation of solid particle impacts on Al6061-T6, Part I: Three-dimensional representation of angular particles, Wear, 292–293, (2012), 100–110.
  16. H. Getu, J.K. Spelt, and M. Papini, Conditions leading to the embedding of angular and spherical particles during the solid particle erosion of polymers, Wear, 292–293, (2012), 159–168.
  17. E. Akbarzadeh, E. Elsaadawy, A.M. Sherik, J.K. Spelt and M. Papini, The solid particle erosion of 12 metals using magnetite erodent, Wear, 282–283 (2012), 40–51.
  18. M. Takaffoli and M. Papini, Material deformation and removal due to single particle impacts on ductile materials using smoothed particle hydrodynamics, Wear, 274–275, (2012), 50–59.
  19. H. Getu, J.K. Spelt, and M. Papini, Reduction of Particle Embedding in Solid Particle Erosion of Polymers, Wear, 270 (11-12), (2011), 922-928.
  20. T. Burzynski and M. Papini, Analytical model of particle interference effects in divergent erosive jets, Tribology International, 43 (3), (2010), 554-567.
  21. M. Papini, A.O. Oladeinde, J.K. Spelt, and P.M. Aumuller, The solid particle erosion behaviour of dental enamel using a novel air abrasion system, International Journal of Abrasive Technology, 3 (2), (2010), 92-104.
  22. M. Takaffoli and M. Papini, Finite element analysis of single impacts of angular particles on ductile targets, Wear, 267, (1-4), (2009), 144-151.
  23. T. Burzynski and M. Papini, Analytical models of the interference between incident and rebounding particles within an abrasive jet: Comparison with computer simulation, Wear 263(7-12), (2007), 1593-1601.
  24. M. Papini and S. Dhar, Experimental verification of a model of erosion due to the impact of rigid single angular particles on fully-plastic targets, International Journal of Mechanical Sciences 48 (2006), 469-482.
  25. C. Gomes Ferreira, D. Ciampini, and M. Papini, The effect of inter-particle collisions in erosive streams on the distribution of energy flux incident to a flat surface, Tribology International 37 (2004) 791-807.
  26. S. Dhar, T. Krajac, D. Ciampini and M. Papini, Erosion mechanisms due to impact of single angular particles, Wear 258 (1-4), (2004), 567-579.
  27. M. Papini, D. Ciampini, T. Krajac and J.K. Spelt, Computer modelling of interference effects in erosion testing: effect of plume shape, Wear 255 (1-6), (2003) 85-97.
  28. D. Ciampini, J.K. Spelt and M. Papini, Simulation of interference effects in particle streams following impact with a flat surface, Part I: Theory and analysis, Wear 254 (2003) 237-249.
  29. D. Ciampini, J.K. Spelt and M. Papini, Simulation of interference effects in particle streams following impact with a flat surface, Part II: Parametric study and implications for erosion testing and blast cleaning, Wear 254 (2003) 250-264.
  30. P. Tangestanian, M. Papini, and J.K. Spelt, Starch media blasting of artificially aged paint films, Wear 248 (1-2), (2001), 128-139.
  31. M. Papini and J. K. Spelt, Impact of rigid angular particles with fully plastic targets- Part I: Analysis, International Journal of Mechanical Sciences 42 (5), (2000), 991-1006.
  32. M. Papini, and J. K. Spelt, Impact of rigid angular particles with fully plastic targets- Part II: Parametric study of erosion phenomena, International Journal of Mechanical Sciences 42 (5), (2000), 1007-1025.
  33. B. Djurovic, E. Jean, P. Tangestanian, M. Papini, and J. K. Spelt, Wheat starch blasting of aluminum and composite substrates, Wear, 224 (1999), 22-37.
  34. M. Papini and J.K. Spelt, Indentation-induced buckling of organic coatings- Part I: Theory and analysis, International Journal of Mechanical Sciences, 40 (10), (1998), 1043-1059.
  35. M. Papini and J. K. Spelt, Indentation-induced buckling of organic coatings-Part II: Measurements with impacting particles, International Journal of Mechanical Sciences, 40 (10), (1998), 1061-1068.
  36. M. Papini and J.K. Spelt, The plowing erosion of organic coatings by spherical particles, Wear, 222 (1998), 38-48.
  37. M. Papini and J.K. Spelt, Organic coating removal by particle impact, Wear 213 (1997), 185-199.
Fatigue and Fracture of Adhesive Joints
  1. S. Azari, M. Papini, and J.K. Spelt, Fatigue threshold and crack growth rate of adhesively bonded joints as a function of load/displacement ratio, Composites Part A, 57, (2014), 59–66.
  2. G. Jhin, S. Azari, A. Ameli, N. Datla, M. Papini and J.K. Spelt, Crack growth rate and crack path in adhesively bonded joints: Comparison of creep, fatigue and fracture, International Journal of Adhesion and Adhesives, 46, (2013), 74–84.
  3. S. Azari, A. Ameli, M. Papini, and J.K. Spelt, Adherend Thickness Influence on Fatigue Behavior and Fatigue Failure Prediction of Adhesively Bonded Joints, Composites A, 48, (2013), 181-191.
  4. A. Ameli, S. Azari, M. Papini and J.K. Spelt, Characterization and prediction of fracture properties in hygrothermally degraded adhesive joints: An open-faced approach, Journal of Adhesion Science and Technology, 27 (10), (2013), 1080-1103.
  5. S. Azari, A. Ameli, M. Papini, and J.K. Spelt, Analysis and design of adhesively bonded joints for fatigue and fracture loading: A fracture mechanics approach, Journal of Adhesion Science and Technology, 27(15), 2013.
  6. S. Azari, A. Ameli, N.V. Datla, M. Papini, and J. K. Spelt, Effect of Substrate Modulus on the Fatigue Behavior of Adhesively Bonded Joints, Material Science and Engineering A, 534, (2012), 594–602.
  7. A. Ameli, N.V. Datla, S. Azari, M. Papini and J.K. Spelt, Prediction of environmental degradation of closed adhesive joints using data from open-faced specimens, Composite Structures, 94(2), (2012),779–86.
  8. N.V. Datla, A. Ameli, S. Azari, M. Papini and J.K. Spelt, Effects of hygrothermal aging on the fatigue behavior of two toughened epoxy adhesives, Engineering Fracture Mechanics, 79, (2012), 61–77.
  9. A. Ameli, M. Papini, and J.K. Spelt, Evolution of crack path and fracture surface with degradation in rubber-toughened epoxy adhesive joints: Application to open-faced specimens, International Journal of Adhesion and Adhesives, 31 (6), (2011), 530-540.
  10. A. Ameli, S. Azari, M. Papini, and J.K.Spelt, Crack path selection in the fracture of fresh and degraded epoxy adhesive joints, Engineering Fracture Mechanics, 78 ( 9), (2011), 1986-2003.
  11. N.V. Datla, J. Ulicny, B. Carlson, M. Papini, and J.K. Spelt, The effects of test temperature and humidity on the mixed-mode fatigue behavior of a toughened adhesive aluminum joint, Engineering Fracture Mechanics, 78 (6), (2011), 1125-1139.
  12. N.V. Datla, J. Ulicny, B. Carlson, M. Papini and J.K. Spelt, Mixed Mode fatigue Behavior of Degraded Toughened Epoxy Adhesive, International Journal of Adhesion and Adhesives, 31(2), (2011), 88-96.
  13. A. Ameli, M. Papini and J.K. Spelt, Hygrothermal degradation of two rubber-toughened epoxy adhesives: application of open-faced fracture tests, International Journal of Adhesion and Adhesives, 31 (1), (2011), 9-19.
  14. S. Azari, M. Papini, and J.K. Spelt, Effect of adhesive thickness on fatigue and fracture of toughened epoxy joints – Part II. Analysis and Finite Element Modeling, Engineering Fracture Mechanics, 78 (1), (2011), 138-152.
  15. S. Azari, M. Papini, and J.K. Spelt, Effect of Adhesive Thickness on Fatigue and Fracture of Toughened Epoxy Joints – Part I: Experiments, Engineering Fracture Mechanics, 78 (1), (2011), 153-162.
  16. A. Ameli, M. Papini and J.K. Spelt, Fracture R-curve of a toughened epoxy adhesive as a function of irreversible degradation, Materials Science and Engineering A, 527 (20), (2010), 5105-5114.
  17. N.V. Datla, M. Papini, J.A. Schroeder, and J.K. Spelt, Modified DCB and CLS specimens for mixed mode fatigue testing of adhesively bonded thin sheets, International Journal of Adhesion and Adhesives, 30 (6), (2010), 439-447.
  18. S. Azari, M. Papini, and J.K. Spelt, Effect of surface roughness on the performance of adhesive joints under static and cyclic loading, Journal of Adhesion, 86 ( 7), (2010), 742 – 764.
  19. A. Ameli­, N.V. Datla, M. Papini and J.K. Spelt, Hygrothermal properties of highly toughened adhesives, Journal of Adhesion, 86 (7), (2010), 698 – 725..
  20. S. Azari, M. Papini, J.A. Schroeder, and J.K. Spelt, Fatigue threshold behavior of adhesive joints, International Journal of Adhesion and Adhesives, 30 (3), (2010), 145-159.
  21. A. Ameli, M. Papini, J.K. Spelt, Fracture R-curve characterization of toughened epoxy adhesives, Engineering Fracture Mechanics, 77 (3), (2010), 521-534.
  22. S. Azari, M. Papini, J.A. Schroeder, and J.K. Spelt, The effect of mode ratio and bond interface on the fatigue behavior of a highly-toughened epoxy, Engineering Fracture Mechanics, 77 (3), (2010), 395-414.
  23. S. Azari, M. Eskandarian, M. Papini, J.A. Schroeder, D.L. Faulkner and J.K. Spelt, Fracture load predictions and measurements for highly toughened epoxy adhesive joints, Engineering Fracture Mechanics, 76 (2009) 2039–2055.
  24. M. Papini, G. Fernlund, and J.K. Spelt, Effect of crack-growth mechanism on the prediction of fracture load of adhesive joints, Composites Science and Technology, 52, (1994), 568-570.
  25. M. Papini, G. Fernlund, and J.K. Spelt, Effect of geometry on the fracture of adhesive joints, International Journal of Adhesion and Adhesives, 14, (1994), 5-13.
  26. G. Fernlund, M. Papini, D. McCammond, and J.K. Spelt, Fracture load prediction of adhesive joints, Composites Science and Technology, 51, (1994), 587- 600.
  27. M. Papini and J.K. Spelt, Crack detection in adhesive joints: use of strain gages in aggressive environments, Journal of Adhesion Science Technology, 6 (10), (1992), 1157-1164.
Biomechanics and Biomaterials
  1. E. Deignan, A. Alabassi, S. Brandon, M.Papini, M. Hurtig, M. Towler, Partial coverage adhesive augmented sternal fixation and stabilization: A biomechanical analysis, Journal of Biomechanics 177, (2024), 112374
  2. V. P. S. Sidhu, M. R. Towler, and M. Papini, Effect of liquid environment on adhesion strength of bioactive glass-based adhesives to bone, International Journal of Adhesion and Adhesives 126, (2023), 103466.
  3. Daniella Marx, Sunjeev Phull, Marcello Papini, Mark Towler, Tissue response to a novel bone adhesive implanted subcutaneously in rats: a histological and gene expression analysis, Nano Select 4 (2023) ,408.
  4. A. Al-abassi, M. Papini, M. Towler, Review of Biomechanical Studies and Finite Element Modeling of Sternal Closure Using Bio-Active Adhesives, Bioengineering (Basel) 9(5), (2022), 198.
  5. D. Marx, A. Rahimnejad Yazdi, M. Papini, M. Towler, In vitro immunomodulatory effects of novel strontium and zinc-containing GPCs, Bio-Medical Materials and Engineering 33(5), (2022), 377-391.
  6. V.P.S. Sidhu, F. Bilwani, M. R. Towler, M.Papini. Adhesion of bioactive glass-based adhesive to bone, Journal of the Mechanical Behavior of Biomedical Materials 126, (2022), 105018.
  7. L. Hasandoost, D. Marx, P. Zalzal, O. Safir, M. Hurtig, C. Mehrvar, S. D. Waldman, M. Papini, M. R. Towler, Comparative evaluation of two Glass Polyalkenoate Cements: An in vivo pilot study using a sheep model, Journal of Functional Biomaterials 12(3), (2021_, 44.
  8. C. Mehrvar, E. Deignan, M. Hurtig, G. Cohen, P. Zalzal, O. Safir, A. Alhalawani, M. Papini, M. R. Towler, In vivo Analysis of A Novel Glass-Based Adhesive for Sternal Fixation and Stabilization Using Rabbit and Sheep Models, Journal of Materials Science: Materials in Medicine, 32, (2021). 53.
  9. D. Marx, A. Yazdi, M. Papini, M. Towler, In vitro osteogenic performance of two novel strontium and zinc-containing glass polyalkenoate cements, Journal of Biomedical Materials Research: Part A, 109(8), (2021), 1366-1378
  10. L. Hasanddost, O. Rodriguez, A. Alhalawani, A. Rahimnejad Yazdi, P. Zalzal, E.H. Schemitsch, S.D. Waldman, M. Papini, M.R.Towler, Calcium Sulfate-Containing Glass Polyalkenoate Cement for Revision Total Knee Arthroplasty Fixation, J. Biomed. Mater. Res. Part B: Applied Biomaterials, 108 (8). (2020), 3356-3369.
  11. Romina Shafaghi, Omar Rodriguez, Anthony W. Wren, Loraine Chiu, Emil H. Schemitsch, Paul Zalzal, Stephen D. Waldman, Marcello Papini, Mark R. Towler, In-vitro evaluation of novel titania-containing borate bioactive glass scaffolds, Journal of Biomedical Materials Research: Part A, 109(2), (2021), 146-158.
  12. D. Marx, A. Rahimnejad Yazdi, M. Papini, M. Towler, Review of the Latest Insights into the Mechanism of Action of Strontium in Bone, Bone Reports, (2020), 100273
  13. L. Hasanddost, O. Rodriguez, A. Alhalawani, P. Zalzal, E.H. Schemitsch, S.D. Waldman, M. Papini, M.R.Towler, The role of poly (methyl methacrylate) in management of bone loss and bone infection in revision total knee arthroplasty: a Review, Journal of Functional Biomaterials, 11(2),(2020), 25.
  14. R. Shafaghi, O. Rodriguez, S. Phull, E.H. Schemitsch, P. Zalzal, S. D. Waldman, M. Papini, M. R. Towler, Effect of TiO2 Doping on Degradation Rate, Microstructure and Strength of Borate Bioactive Glass Scaffolds, Materials Science & Engineering C, 107, (2020), 110351.
  15. V. P. S. Sidhu, M. R. Towler, M. Papini, Measurement of adhesion of sternal wires to a novel bioactive glass-based adhesive, Journal of Functional Biomaterials, 10(3), (2019), 37.
  16. R. Shafaghi, P. Zalzal, M. Papini, S. Waldman, E.H. Schemitsch, O. Rodriguez, M. Towler, A review of materials for managing bone loss in revision total knee arthroplasty, Materials Science & Engineering C, 104, (2019), 109941.
  17. C. Mehrvar, P. Kuzyk, G. Cohen, O. Safir, P. Zalzal, A. Alhalawani, M. Towler, M. Papini, Novel adhesives for sternal fixation and stabilization: a biomechanical analysis, Clinical Biomechanics, 62, (2019), 66–71.
  18. C. Mehrvar, P. Kuzyk, J. Shamlou, O. Safir, P. Zalzal, A. Alhalawani, M. Towler, M. Papini, Novel adhesives for distal radius fixation: A biomechanical analysis, Journal of the Mechanical Behavior of Biomedical Materials, 89, (2019), 99-106.
  19. P Zalzal, O Safir, A Alhalawani, M Papini, M Towler, Percutaneous upper extremity fracture fixation using a novel glass-based adhesive, Journal of Orthopaedics, 15 (1), (2018), 67-69.
  20. A. Matinmanesh, Y. Li, A. Nouhi, P. Zalzal, E.H. Schemitsch, M.R. Towler, M. Papini, Evaluating the critical strain energy release rate of bioactive glass coatings on Ti6Al4V substrates after degradation, Journal of the Mechanical Behavior of Biomedical Materials, 78, (2018), 273-281.
  21. O. Rodriguez, W. Stone, E. H. Schemitsch, P. Zalzal, S. Waldman, M. Papini, M.R Towler, Titanium addition influences antibacterial activity of bioactive glass coatings on metallic implants, Heliyon, 3 (10), (2017), Article e00420.
  22. A. Matinmanesh, Y. Li, O. Clarkin, P. Zalzal, E.H. Schemitsch, M. R. Towler , M. Papini, Quantifying the mode II critical strain energy release rate of borate bioactive glass coatings on Ti6Al4V substrates, Journal of the Mechanical Behavior of Biomedical Materials, 75, (2017), 212-221.
  23. Y Li, A. Matinmanesh, D.J. Curran, E. Schemitsch, P. Zalzal, M. Papini, A.W Wren, M.R. Towler, ‘Characterization and Fracture Property of Different Strontium-Containing Borate-Based Glass Coatings for Ti6Al4V Substrates’. Journal of Non-Crystalline Solids, 458, (2017), 69-75.
  24. O. Rodriguez. A. Matinmanesh, S. Phull, E. H. Schemitsch, P. Zalzal, O.M. Clarkin, M. Papini and M. R. Towler, Silica-Based and Borate-Based, Titania-Containing Bioactive Coatings Characterization: Critical Strain Energy Release Rate, Residual Stresses, Hardness, and Thermal Expansion, Journal of Functional Biomaterials 7, 32, (2016).
  25. Y. Li, W. Stone, E. H. Schemitsch, P. Zalzal, M. Papini, S D Waldman, M. R. Towler, Antibacterial and osteo-stimulatory effects of a borate-based glass series doped with strontium ions, Journal of Biomaterials Applications, 31 (5), 674-683.
  26. A. Matinmanesh, O. Rodriguez, M.R. Towler, P. Zalzal, E.H. Schemitsch, M. Papini, Quantitative evaluation of the adhesion of bioactive glasses onto Ti6Al4V substrates, Materials and Design 97 (2016) 213–221.
  27. O. Rodriguez, D. J. Curran, M. Papini, L. M. Placek, A. W. Wren, E. H. Schemitsch, P. Zalzal, M. R.Towler, Characterization of Silica-based and Borate-based, Titanium-containing Bioactive Glasses for Coating Metallic Implants, Journal of Non-Crystalline Solids, 433, (2016), 95–102.
  28. A. Seifzadeh, D.C.D. Oguamanam, and M. Papini, Evaluation of the constitutive properties of native, tissue engineered, and degenerated articular cartilage, Clinical Biomechanics, 27 (8), (2012), 852–858.
  29. A. Seifzadeh, J. Wang, D.C.D. Oguamanam, and M. Papini, A non-linear biphasic fiber-reinforced porohyperviscoelastic (BFPHVE) model of articular cartilage incorporating fiber reorientation and dispersion, ASME Journal of Biomechanical Engineering, 133 (8), (2011), 081004 (8 pp).
  30. A. Seifzadeh, D.C.D. Oguamanan, N. Trutiak, M. Hurtig, and M. Papini, Determination of Nonlinear Fibre-reinforced Biphasic Poroviscoelastic Constitutive Parameters of Articular Cartilage Using Stress Relaxation Indentation Testing and an Optimizing Finite Element Analysis, Computer Methods and Programs in Biomedicine, 107 (2), (2012), 315–326
  31. R. Guha-Smith, N. Shear, and M. Papini, Ballistic Impact of Single Particles into Gelatin: Experiments and Modelling With Application to Transdermal Pharmaceutical Delivery, ASME Journal of Biomechanical Engineering, 132 (10), (2010), 101003 (10 pp).
  32. H. Bougherara, R. Zdero, S. Shah, M. Miric, M. Papini, P. Zalzal, and E. H Schemitsch, A biomechanical assessment of modular and monoblock revision hip implants using FE analysis and strain gage measurements, Journal of Orthopaedic Surgery and Research  5(34) (2010).
  33. E.T. Davis, M. Olsen, R. Zdero, M. Papini, P. Waddell, and E.H. Schemitsch, A biomechanical and finite element analysis of femoral neck notching during hip resurfacing, ASME Journal of Biomechanical Engineering, 131 (4), (2009), 041002 (8 pp).
  34. S. Towfighian, K. Behdinan, M. Papini, Z. Saghir, P. Zalzal, and J. deBeer, Finite element modeling of low speed femur reaming using reamers with irregular tooth spacing, Journal of Sound and Vibration, 318 (4-5), (2008), 868-883.
  35. S. Towfighian, K. Behdinan, M. Papini, Z. Saghir, P. Zalzal, and J. deBeer, Finite element modeling of low speed reaming vibrations with reamer geometry modifications, Journal of Intelligent Manufacturing 18(6), (2007), 647-661.
  36. R. Zdero, S. Rose, E. H. Schemitsch and M. Papini, Cortical screw pullout strength and effective shear stress in synthetic third generation composite femurs, Journal of Biomechanical Engineering, 129 (2), (2007), 289-293.
  37. M. Papini, R. Zdero, P. Zalzal and E.H. Schemitsch,The biomechanics of human femurs in axial and torsional loading: Comparison of finite element analysis, human cadaveric femurs, and synthetic femurs, Journal of Biomechanical Engineering, 129 (1), (2007), 12-19.
  38. D. Dobrjanski, Z.Saghir, K. Behdinan, P. Zalzal, J. de Beer and M. Papini, Intramedullary canal pressure distribution: An experimental parametric study, Journal of Arthroplasty, 22 (3), (2007), 417-427.
  39. O. Gaber, K. Behdinan, J. de Beer , P. Zalzal , M. Papini and M. Z. Saghir, Computational fluid dynamics modeling of insertion and advancement of a reamer into the intramedullary canal of a long bone, Medical Engineering & Physics, 29 (1), (2007), 125-133.
  40. P. Zalzal, D. Backstein, A.E. Gross, and M. Papini, Notching of the anterior femoral cortex during total knee arthroplasty: Characteristics that increase local stresses, Journal of Arthroplasty, 21 (5), (2006), 737-743.
  41. J Bahen, O. Gaber, K. Behdinan, J. de Beer, P. Zalzal, M. Papini and M. Z. Saghir, Computational fluid dynamics modeling of the effect of rotation during reaming into the intramedullary canal of a long bone, Fluid Dynamics and Materials Processing, 1 (4), (2005), 343-351.
  42. G. Cheung, P. Zalzal, M. Bhandari, J.K. Spelt-and M. Papini, Finite element analysis of a femoral retrograde intramedullary nail subject to gait loading, Medical Engineering & Physics 26 (2004) 93-108.
  43. P. Zalzal, M. Papini, D. Petruccelli, J. de Beer, and M. Winemaker, An in-vivo biomechanical analysis of the soft tissue envelope of osteoarthritic knees, Journal of Arthroplasty, 19 (2) (2004), 217-223.
Other Areas
  1. D. Ciampini, M. Papini, and J.K. Spelt, Modeling the development of almen strip curvature in vibratory finishing, Journal of Materials Processing Technology, 209 (6), (2009), 2923-2939.
  2. D. Ciampini, M. Papini, and J.K. Spelt, Characterization of vibratory finishing using the almen system, Wear 264 (7-8). (2008), 671-678.
  3. D. Ciampini, M. Papini and J.K. Spelt, Impact velocity measurement of media in a vibratory finisher, Journal of Materials Processing Technology, 183 (2007) 347–357.
  4. K. Mirkhani, C. Chaggares, C. Masterson, M. Jastrzebski, T. Dusatko, R. Jafari Shapoorabadi, M. Papini, A. Konrad and A. Sinclair, Optimal design of EMAT transmitters, NDT & E International, 37 (2004), 181-193.

Chapters in Books

  1. A. Ameli, N.V. Datla, S. Azari, M. Papini and J.K. Spelt, Durability testing using open-faced specimens, in Best practices in preparing and testing adhesive joints, LFM da Silva, D Dillard, B Blackman, R D Adams (Editors), Wiley, Weinheim, 2011.
  2. A. Ameli, S. Azari, M. Papini, and J.K. Spelt, Mixed-mode fracture testing, in Best practices in preparing and testing adhesive joints, LFM da Silva, D Dillard, B Blackman, R D Adams (Editors), Wiley, Weinheim, 2011.
  3. S. Azari, A. Ameli, M. Papini, and J.K. Spelt, Mixed-mode fatigue testing of adhesive joints, in Best practices in preparing and testing adhesive joints, LFM da Silva, D Dillard, B Blackman, R D Adams (Editors), Wiley, Weinheim, 2011.
  4. H. Bougherara, M. Papini, M. Olsen, R. Zdero, P. Zalzal, and E.H. Schemitsch, Chapter 2, Hybrid Composite-Metal Hip Resurfacing Implant for Active Patient, in Damage and fracture mechanics: Failure analysis of engineering materials and structures, T. Boukharouba, M. Elboujdaini, and G. Pluvinage (Editors), Springer Science and Business Media, 2009, 567-572.
  5. M. Papini and J.K. Spelt, Chapter 9, Mechanics of Coatings, in The Mechanics of Coatings, Adhesion Science and Engineering, Vol. I, D. Dillard and A.V. Pocius (Eds.), Elsevier Applied Science, 2002, pp. 303-350.

Papers in refereed conference proceedings

  1. J Schwartzentruber, M. Papini, H-T. Liu, C. Narayanan, (2016). Optimized Abrasive Waterjet Nozzle Design using Genetic Algorithms. 23rd International Conference on Water Jetting.
  2. M.R. Sookhak Lari, M. Papini. Control of micro-channel cross-sectional shape in the abrasive jet micromachining of ductile and brittle materials, 11th International Conference on Micromanufacturing (ICOMM 2016), Irvine, CA, USA, March 29-31, 2016.
  3. J. Schwartzentruber, M. Papini, J.K. Spelt, Abrasive waterjet machining of small features in composite materials”, 20th International Conference on Composite Materials (ICCM20), Copenhagen, Denmark, 19-24 July, 2015.
  4.  I. El Sawi, M. Papini, Z. Fawaz, Z. Redouane , H. Bougherara, A comparative experimental study of machining flax fiber reinforced polymer composite laminates using abrasive waterjet and drilling tools, CANCOM 2015, Edmonton, AB, Canada, Aug. 18-20, 2015.
  5. H. J. Crabtree, A. Ghobeity, M. Papini J.K. Spelt, Microfluidic chip performance as a function of surface roughness, Pacifichem 2015, Honolulu, HI, Dec. 2015.
  6. H. Nouraei, K. Kowsari, B. Samareh, M. Papini, J.K. Spelt, A combined numerical-analytical methodology for surface profile prediction of abrasive slurry jet micro-machined holes, Proceedings of the 4M/ICOMM2015 Conference, Milan, Italy, 31 March-2 April, 2015.
  7. N. Haghbin, F. Ahmadzadeh, J.K. Spelt, M. Papini, Micro-machining of channels using a high pressure abrasive slurry jet machine (HASJM), Proceedings of the 4M/ICOMM2015 Conference, Milan, Italy, 31 March-2 April, 2015.
  8. K. Kowsari, H. Nouraei, M. Papini, J.K. Spelt, Surface evolution models for abrasive slurry jet micro-machining of channels and holes in alumina, 9th International Conference on Micromanufacturing, Nanyang Technological University, National University of Singapore, 25-28 March 2014, Singapore.
  9. R. Jafar, J.K. Spelt, and M. Papini, Erosive Smoothing in Abrasive Jet Micromachining of Glass, International Conference on Mechanical Engineering and Mechatronics, August 2013, Toronto, On. Best Paper award winner- also invited for publication in International journal of mechanical engineering and mechatronics.
  10. H. Bougherara, M.Papini, M. Olsen, R. Zdero, P. Zalzal and E.H. Schemitsch, Hybrid Composite-Metal Hip Resurfacing Implant for Active Patient, in Damage and Fracture Mechanics: Failure Analysis of Engineering Materials and Structures, T. Boukharouba, M. Elboujdaini and G. Pluvinage (eds.), Springer Netherlands, 2009, doi: 10.1007/978-90-481-2669-9. Also presented at 1st African Interquadrennial Icf Conference, Damage And Fracture Mechanics; Failure Analysis Of Engineering Materials And Structures, June 1 – 5, 2008, Algiers, 2008.
  11. H. Bougherara, R. Zdero, M. Miric, S. Shah, M. Papini, P. Zalzal, E. Schemitsch, The biomechanics of biomimetic T2 nailing implant for the treatment of femur fracture, Fourth International Conference in Thermal Engineering, ICTEA, Abu Dhabi, January 12-14, 2009.
  12. A. Ghobeity, M. Papini, J.K. Spelt, Surface evolution models in abrasive jet micromachining, Proceedings of the 2006 CSME Forum (CD ROM), Kanaskis, Alberta, Canada, May 21-24, 2006.
  13. D. Dobrjanski, A. Hojabr, Z. Saghir, K. Behdinan, P. Zalzal, J. de Beer and M. Papini, Simulation of the pressure buildup in the intramedullary canal during orthopaedic procedures using a synthetic femur analogue, Proceedings of the 2006 CSME Forum (CD ROM), Kanaskis, Alberta, Canada, May 21-24, 2006.
  14. D. Dobrjanski, O. Gaber, Z. Saghir, K. Behdinan, P. Zalzal, J. de Beer, and M. Papini, The pressure generated during the insertion of an intramedullary device: experiments and numerical modeling, Transactions of the Wessex Institute: Modelling in Medicine and Biology VI, Biomedicine and Health, Vol 8, Ed. M Ursino, 2005, pp 249-256.
  15. O. Gaber, K. Behdinan, J. de Beer, P. Zalzal , M. Papini and M. Z. Saghir, The effect of reaming velocity on the pressure distribution in the intramedullary cavity, Transactions of the Wessex Institute: Modelling in Medicine and Biology VI, Biomedicine and Health, Vol 8, Ed. M Ursino, 2005, pp 257-266.
  16. D. Ciampini, J.K. Spelt, and M. Papini, Computer simulation of the interference between incident and rebounding particle streams, Transactions of the 2002 CSME Forum, Kingston, Ontario, May 21-24, 2002, CD-ROM format proceedings.
  17. M. Papini, G. Fernlund, and J.K. Spelt, Fracture mechanics: A tool for failure load predictions in the design of adhesively bonded structures, Proceedings of Second Canadian International Composites Conference and Exhibition, September 27-29, 1993, Ottawa, Ontario, Canada. Ed. William Wallace, Raymond Gauvin, and Suong V. Hoa.
  18. M. Papini and J.K. Spelt, Fracture mechanics of adhesive joint sandwich elements: a tool for design, Proceedings of 24th International SAMPE Technical Conference, October 20-22, 1992, Toronto, Ontario, Canada.

Abstracts in refereed conference proceedings

  1. M. Moghaddam and M. Papini, Surface evolution modeling in multi-pass high-pressure abrasive slurry jet pocket milling, Water Jet 2023, Kutna Hora, Czech Republic, Oct. 17-19, 2023.
  2. M. A. Nasiri Jahroodi, Abrasive slurry jet micromachining of channels on rods: Surface evolution modeling, Water Jet 2023, Kutna Hora, Czech Republic, Oct. 17-19, 2023.
  3. E. Azarsa and M.Papini, Abrasive water jet micro-machining for fabrication of micro-structures, fins and pillars on Copper C110, Water Jet 2019: Research, Development, Application Celadna, Czech Republic November 20-22, 2019. Winner of Best Paper of Conference Award.
  4. O. Rodriguez, A. Matinmanesh, S. Phull, E. Schemitsch, P. Zalzal, O. Clarkin, M. Papini & M.R. Towler, Novel Titania-Incorporated Bioactive Glass Coating for Surgical Implants: Mechanical Characterization, Biomedical Engineering Society Annual Meeting; Phoenix, Arizona, USA (2017).
  5. Y. Li, W. Stone, E.H. Schemitsch, P. Zalzal, M. Papini, S.D. Waldman & M.R. Towler. Antibacterial and Osteo-stimulatory Effects of a Borate-based Glass Series Doped with Strontium Ions, 12th Pacific Rim Conference on Ceramic and Glass Technology; Waikoloa, Hawaii, USA (2017).
  6. A. Matinmanesh, O. Rodriguez, M. R. Towler, P. Zalzal, E.H. Schemitsch & M. Papini. Evaluating the adhesion of bioactive glass coatings onto Ti alloy substrates under mode I loading condition, 12th Pacific Rim Conference on Ceramic and Glass Technology; Waikoloa, Hawaii, USA (2017).
  7. O. Rodriguez, D. Curran, M. Papini, L. Placek, A. Wren, E. Schemitsch, P. Zalzal & M.R. Towler, Titanium-Containing Bioactive Glasses for Clinical Applications: Structural Analysis’. Biomedical Engineering Society Conference Proceedings, Minneapolis, MN, USA (2016).
  8. O. Rodriguez, D.J. Curran, M. Papini, L.M. Placek, A.W. Wren, E.H. Schemitsch, P. Zalzal & M.R. Towler, Characterization of titanium-containing bioactive glasses for coating metallic implants, World Biomaterials Congress, Montreal, Canada (2016).
  9. Y. Li, D.J. Curran, E.H. Schemitsch , P. Zalzal, M. Papini , A.W. Wren & M.R. Towler, The effect of increasing Sr2+content on the structure of a borate glass series, World Biomaterials Congress, Montreal, Canada (2016).
  10. N.V. Datla, M. Papini and J.K. Spelt, Fatigue behavior of degraded toughened joints measured using open-faced specimens, 34th Annual Meeting of The Adhesion Society, Savannah, GA, USA, February 13-16, 2011.
  11. A. Ameli, M. Papini, and J.K. Spelt. Fracture toughness prediction of closed degraded toughened epoxy adhesive joints, 34th Annual Meeting of Adhesion Society, Savannah, GA USA, February 13-16, 2011.
  12. A. Seifzadeh, D.C.D. Oguamanam, R. M. Pilliar, and M. Papini, 2010, Determination of bulk and relaxation viscoelastic material parameters of articular cartilage, 7th Ontario Biomechanics Conference, Barrie, ON , Canada, March 12-14, 2010.
  13. A. Seifzadeh, D. Oguamanam, and M. Papini, Improved Prediction Of Stress Relaxation Indentation Response Of Cartilage Using A Nonlinear Biphasic Poroviscoelastic Model, CSB 2010, 16th Biennial Conference of the Canadian Society for Biomechanics, Queens University, Kingston, ON, Canada, June 9-12, 2010.
  14. A. Seifzadeh, D. Oguamanam, and M. Papini, A modified objective function for determining material properties of tissues using optimization methods, 20th ASME Annual Conference on Information Storage & Processing Systems 2010, Santa Clara University, Santa Clara, California, USA, June 14 -15, 2010.
  15. N.V. Datla, M. Papini and J.K. Spelt, Effect of humidity and temperature on the fatigue behaviour of a toughened epoxy adhesive, 33rd Annual Meeting of the Adhesion Society, Daytona Beach, FL, USA, February 21-24, 2010.
  16. A. Ameli, M. Papini, and J.K. Spelt. Fracture R-curve of a toughened epoxy adhesive as a function of aging conditions and time, 33rd Annual Meeting of Adhesion Society, Daytona Beach, FL USA, February 21-24, 2010.
  17. S. Azari, M. Papini and J.K. Spelt, Effect of the applied strain energy release rate on fatigue crack path selection in toughened epoxy adhesive joints, 33rd Annual Meeting of the Adhesion Society, Daytona Beach, FL USA, February 21-24, 2010.
  18. S. Azari, M. Papini and J.K. Spelt, Fatigue performance of an adhesive system under mixed-mode loading – Effect of adhesive thickness, 32nd Annual Meeting of the Adhesion Society, Savannah, Georgia, US, February 15-18, 2009.
  19. N.V. Datla, M. Papini and J. K.Spelt. Fatigue tests of reinforced sheet specimens: Effect of reinforcing adhesive layer , 32nd Annual Meeting of the Adhesion Society, Savannah, GA February 15-18, 2009.
  20. A. Ameli, M. Papini, and J.K. Spelt. Environmental characterization of a toughened epoxy adhesive, 32nd Annual Meeting of the Adhesion Society, Savannah, GA February 15-18, 2009.
  21. H. Getu, JK Spelt, and M. Papini, Erosion rate enhancement in the abrasive jet micro-machining of polymers and elastomers, 1st International Conference on Abrasive Processes, Cambridge, UK, Sept 21-25, 2008.
  22. M. Eskandarian, S. Azari, M. Papini and J.K. Spelt, The effects of substrate material and joint geometry on the quasi-static behavior of adhesive joints – Updated works, EurAdh Conference, September 2008, Oxford, UK.
  23. S. Azari, M. Papini, J.A. Schroeder, D.L. Faulkner, and J.K. Spelt, Fatigue Performance of an Adhesive System Under Mixed-Mode Loading, 31st Annual Meeting of the Adhesion Society, Austin, Texas, 17-20 February 2008.
  24. A. Ameli, M. Papini, J.A. Schroeder, D.L. Faulkner, and J.K. Spelt. R-curve behavior in the fracture of toughened adhesives, 31st Annual Meeting of Adhesion Society, Austin, TX USA, 17-20 February, 2008.
  25. M. Eskandarian, F. Mathieu, M. Papini and J.K. Spelt, Time dependent crack growth in adhesive joints, 31st Annual Meeting of Adhesion Society, Austin, Texas, 17-20 February 2008.
  26. M. Eskandarian, G. D’Amours, M. Papini, and J.K. Spelt, Numerical evaluation of strain energy release rate in adhesive joints, 31st Annual Meeting of the Adhesion Society, Austin, Texas, 17-20 February 2008.
  27. M. Eskandarian, S. Azari, J.A. Schroeder, D.L. Faulkner, M. Papini and J.K. Spelt, The effect of substrate material on the quasi-static measurement of critical energy release rate in adhesive joints, 30th Annual Meeting of the Adhesion Society, Tampa Bay, Florida, Feb. 18-21, 2007.
  28. S. Azari, M. Eskandarian, J.A. Schroeder, D.L. Faulkner, M. Papini and J.K. Spelt, Fracture load predictions for a toughened epoxy adhesive, 30th Annual Meeting of the Adhesion Society, Tampa Bay, Florida, Feb. 18-21, 2007.
  29. M. Eskandarian, S. Azari, M. Papini, and J.K. Spelt, Fracture Load Predictions for Adhesive Joints Subject to Quasi-Static Loads, Proceedings of the Light Metals Technology Conference 2007, Saint Sauvert, Quebec, Canada, Sept. 24-26, 2007.
  30. S. Azari, J.A. Schroeder, D.L. Faulkner, M. Papini and J.K. Spelt, The Effect of Loading Phase Angle on the Fatigue Behaviour of an Adhesive Joint, 19th Canadian Materials Science Conference, Hamilton, Ontario, June 20-22, 2007. .
  31. E.T. Davis; M. Olsen; R. Zdero; M. Papini; J. Waddell; and E. Schemitsch, A biomechanical and finite element analysis of femoral neck notching using the Birmingham hip resurfacing, 8th Congress of the European Federation of National Associations of Orthopaedics and Traumatology, Florence, Italy: 11–15 May 2007.
  32. M. Olsen, E.T. Davis, R. Zdero, M. Papini, E.H. Schemitsch, A Biomechanical and Finite Element Analysis of Femoral Neck Notching in Hip Resurfacing, CANCAM 2007, June 3-7, 2007, Toronto, Ontario.
  33. A. Dudi, M. Papini, Design of a Prototype Bioresorbable Tibial Implant in a Sheep Model, CANCAM 2007, June 3-7, 2007, Toronto, Ontario.
  34. T. Burzynski, M. Papini, A Novel Approach to Measure the Particle Distribution within a Particle Laden Jet, CANCAM 2007, June 3-7, 2007, Toronto, Ontario.
  35. G. Hailu, A. Ghobeity, J.K. Spelt, M. Papini, Analytical Modeling of Abrasive Jet Micromachining of Polymethylmethacrylate (PMMA), CANCAM 2007, June 3-7, 2007, Toronto, Ontario.
  36. M. Eskandarian, S. Azari, J.A. Schroeder, D.L. Faulkner, M. Papini and J.K. Spelt, The effect of substrate material on the quasi-static measurement of critical energy release rate in adhesive joints, 30th Annual Meeting of the Adhesion Society, Feb. 18-21, 2007.
  37. S. Azari, M. Eskandarian, J.A. Schroeder, D.L. Faulkner, M. Papini and J.K. Spelt, Fracture load predictions for a toughened epoxy adhesive, 30th Annual Meeting of the Adhesion Society, Feb. 18-21, 2007.
  38. ET Davis, M Olsen, R Zdero, M Papini, JP Waddell, EH Schemitsch, A Biomechanical and finite element analysis of femoral neck notching using the Birmingham Hip Resurfacing, London Hip Meeting 2006- Updates, Developments and Future Technologies, May 18th, 2006, London, UK. This won the best paper award at this conference.
  39. P. Zalzal, D. Dobrjanski, Z.Saghir, K. Behdinan, J. de Beer and M. Papini, How can the risk of fat embolus syndrome be minimized?, Podium Presentation, Canadian Orthopaedic Association Research Society Annual Meeting, Toronto, Ontario, Canada, June 2-4, 2006.
  40. R. Zdero, S. Rose, E. H. Schemitsch and M. Papini, Bicortical screw pullout force and extraction shear stress in synthetic femurs, Podium Presentation, Canadian Orthopaedic Association Research Society Annual Meeting, Toronto, Ontario, Canada, June 2-4, 2006.
  41. P Zalzal, M Papini, D Backstein, A Gross, Anterior femoral notching during total knee arthroplasty: A finite element analysis, Annual Meeting of the American Association of Orthopedic Surgeons, Washington, February 23-27, 2005.
  42. D Backstein, P Zalzal, M Papini, A Gross, Anterior femoral notching during total knee arthroplasty: Characteristics that increase local stress, invited, Annual Meeting of the John Insall Club, Sorrento, Italy, June 2004.
  43. P Zalzal, M Papini, D Backstein, A Gross, Anterior femoral notching during total knee arthroplasty: A finite element analysis, 2004 Canadian Orthopaedic Association Research Society Annual Meeting, Calgary, Alberta, Canada, June 18-20, 2004.
  44. G. Cheung, P. Zalzal, M. Bhandari, J.K. Spelt, and M. Papini, The load sharing characteristics and stress concentrations of a locked retrogradeintramedullary femoral nail, 2004 Canadian Orthopaedic Association Research Society Annual Meeting, Calgary, Alberta, Canada, June 18-20, 2004.
  45. P. Zalzal, M. Papini, D. Petrucelli, J. de Beer, and M. Winemaker, An in-vivo biomechanical analysis of the soft tissue envelope of osteoarthritic knees, Proceedings of the 2003 Canadian Orthopaedic Research Society Annual Meeting, Winnipeg, Manitoba, Canada Oct 3-5, 2003.
  46. M. Papini, M. Bhandari, and P. Zalzal, Stresses at the end of a distal femoral plate: Implications for refracture, Proceedings of the 2003 Canadian Orthopaedic Research Society Annual Meeting, Winnipeg, Manitoba, Canada, Oct 3-5, 2003.
  47. M. Papini and J.K. Spelt, Erosion of organic coatings by single particle impact, 6th International Conference, Coatings for Aerospace Industry CAAI-6, October 20-22, 1999, Toronto, Ontario, Canada.
  48. M. Papini and J.K. Spelt, Buckling and delamination of organic coatings due to particle impact, 5th International Conference, Coatings for Aerospace Industry CAAI-5, October 23-24, 1997, Toronto, Ontario, Canada.
  49. M. Papini and J.K. Spelt, Organic coating removal by particle impact, 1997 Joint American Society of Mechanical Engineers(ASME), American Society of Civil Engineers(ASCE), Society of Engineering Science (SES) Summer Meeting, June 29-July 2, 1997, Evanston, Ill., U.S.A.

Posters

  1. R. Shafaghi; O. Rodriguez; S. Phull; E.H. Schemitsch; P. Zalzal; S.D. Waldman; M. Papini & M. R. Towler, Physical Evaluation of Porous Borate Glass Scaffolds With Increasing Titania Content, Orthopedic Research Society Annual Meeting: Austin, TX, February 2019.
  2. C. Mehrvar, P. Kuzyk, G. Cohen, O. Safir, P, Zalzal, A. Alhalawani, M.R. Towler & M. Papini, Novel Adhesives for Sternal Fixation and Stabilization: A Biomechanical Analysis, Orthopedic Research Society Annual Meeting: Austin, TX, February 2019.
  3. V. Hadavi, M. Papini, Particle embedment during solid particle erosion of ductile materials: numerical modelling and experiments, 20th International Conference on Wear of Materials, Toronto, Canada, 12-16 April 2015.
  4. MR Sookhak Lari, M. Papini Controlling the shape of micro-channels by oscillation using abrasive jet micro-machining, 20th International Conference on Wear of Materials, Toronto, Canada, 12-16 April 2015.
  5. N. Tamannaee, J.K. Spelt, M. Papini, “Abrasive slurry jet micro-machining of thermoplastic olefin (TPO)”, 20th International Conference on Wear of Materials, Toronto, Canada, 12-16 April 2015.
  6. V. Hadavi, M. Papini, The alignment of abrasive particles within an air jet: implications for abrasive jet machining, 20th International Conference on Wear of Materials 2015, Toronto, Canada, April 12-16,2015.
  7. H. Nouraei, M. Papini, M. J.K. Spelt, “Modelling of channel profile development in the abrasive slurry jet micromachining of ductile materials”, 20th International Conference on Wear of Materials, Toronto, Canada, 12-16 April 2015.
  8. K. Kowsari, H. Nouraei, J.K. Spelt, M. Papini, “Centerline roughness reduction in abrasive slurry jet micromachined channels in quartz and polyamide”, 20th International Conference on Wear of Materials, Toronto, Canada, 12-16 April 2015.
  9. N. Haghbin, J.K. Spelt, M. Papini, “Modelling of controlled depth milling using abrasive waterjet micro-machining, 20th International Conference on Wear of Materials, Toronto, Canada, 12-16 April 2015.
  10. K. Kowsari, D.F., James, M Papini,. and Spelt, J.K, The effects of dilute polymer solutions on the shape, roughness and resolution of abrasive slurry jet micro-machined channels”, 19th International Conference on Wear of Materials, Portland, OR, April 14-18, 2013. 3rd place, poster competition.
  11. R.H.M Jafar., J.K. Spelt, and , M. Papini, Analytical modeling of surface roughness and erosion rate in abrasive jet micro-machining of glass, 19th International Conference on Wear of Materials, Portland, OR, April 14-18, 2013.
  12. R.H.M Jafar., H. Nouraei, , J.K. Spelt, and M. Papini,, Numerical simulation of surface roughness and erosion rate in abrasive jet micro-machining of glass, 19th
  13. R.H.M Jafar., J.K. Spelt, and , M. Papini., Erosion and roughness modeling of glass in abrasive slurry jet micro-machining, 19th International Conference on Wear of Materials, Portland, OR, April 14-18, 2013.
  14. H. Nouraei, K.. Kowsari, , M. Papini, and J.K. Spelt, Prediction of machined surface evolution in abrasive slurry jet micro-machining, 19th International Conference on Wear of Materials, Portland, OR, April 14-18, 2013.
  15. R.H.M. Jafar, M. Papini, and J.K. Spelt, Smoothing Micro-channels in Abrasive Jet Machining of Glass, 18th International Conference on the Wear of Materials 2011, Philadelpha, PA, April 3-7, 2011.
  16. T. Burzynski and M. Papini, Modelling and experimental verification of mask wear and its effect on the surface evolution of features in abrasive jet micro-machining: A level set approach, 18th International Conference on the Wear of Materials 2011, Philadelpha, PA, April 3-7, 2011.
  17. H. Nouraei, A. Wodoslawsky, J.K. Spelt and M. Papini Micro-Machining using an abrasive slurry jet, 18th International Conference on the Wear of Materials 2011, Philadelpha, PA, April 3-7, 2011.
  18. H. Getu, J.K. Spelt, and M. Papini, Embedded particle quantification & reduction techniques following solid particle erosion of polymers, 18th International Conference on the Wear of Materials 2011, Philadelpha, PA, April 3-7, 2011.
  19. H. Getu, J.K. Spelt, and M. Papini, Finite element analysis of heat transfer in cryogenically assisted abrasive jet micromachining of PDMS, 18th International Conference on the Wear of Materials 2011, Philadelpha, PA, April 3-7, 2011.
  20. A.G. Gradeen, J.K. Spelt, and M. Papini, Temperature dependence of solid particle erosion in polydimethylsiloxane, 18th International Conference on the Wear of Materials 2011, Philadelpha, PA, April 3-7, 2011.
  21. N. V. Datla, M. Papiniand J.K. Spelt, Fracture tests of reinforced sheet specimens: Effect of reinforcing adhesive layer, submitted August 2007, 31st Annual Meeting of the Adhesion Society, Austin, Texas, 17-20 February 2008.
  22. M. Eskandarian, G. D’Amours, M. Papini and J.K. Spelt, “Numerical evaluation of strain energy release rate in adhesive joints”, 31st Annual Meeting of Adhesion Society, Austin TX, 17-20 February 2008.
  23. A. Ghobeity, H. Getu, , M. Papini, J.K. Spelt, Abrasive Jet Micro-machining of Glass and Polymethylmethacrylate: Surface Evolution Models, 5th Canadian Workshop on MEMS and Microfluidics (CWMEMS 2007), Montreal, Canada, August 12-13, 2007.
  24. P. Zalzal, R. Zdero E. H. Schemitsch, and M. Papini, The Biomechanics of Femurs: Three Techniques, Canadian Orthopaedic Association Research Society Annual Meeting,Toronto, Ontario, Canada, June 2-4, 2006.
  25. B. Kyte, P. Zalzal, M. Papini, and A.E. Gross, Acetabular Defects in Primary and Revision Total Hip Replacement: A Finite Element Analysis, 2004 Canadian Orthopaedic Association Research Society Annual Meeting, Calgary, Alberta, Canada, June 18-20, 2004.

Leave a Reply

Your email address will not be published. Required fields are marked *