The following paper has been accepted in the Journal of Orthpaedics:
Paul Zalzal, Oleg Safir, Adel Alhalawani, Marcello Papini, Mark Towler, Percutaneous upper extremity fracture fixation using a novel glass-based adhesive
Author: mpapini
Co-Editor-In-Chief, Wear
Dr. Papini has been appointed as Co-Editor-In-Chief of the the journal Wear (Elsevier).
Paper accepted
The following paper has been accepted for publication in the Journal of the Mechanical Behavior of Biomedical Materials:
A. Matinmanesh, Y. Li, A. Nouhi, P. Zalzal, E.H. Schemitsch, M.R. Towler, M. Papini, Evaluating the critical strain energy release rate of bioactive glass coatings on Ti6Al4V substrates after degradation
Paper accepted
The following paper has been accepted for publication:
O. Rodriguez, W. Stone, E. H. Schemitsch, P. Zalzal, S. Waldman, M. Papini, M.R Towler, Titanium addition influences antibacterial activity of bioactive glass coatings on metallic implants, Heliyon, accepted, 24 Sept, 2017.
Papers accepted
The following papers have been accepted:
A. Matinmanesh, Y. Li, O. Clarkin, P. Zalzal, E.H. Schemitsch, M. R. Towler , M. Papini, Quantifying the mode II critical strain energy release rate of borate bioactive glass coatings on Ti6Al4V substrates, Journal of the Mechanical Behavior of Biomedical Materials, accepted, July 2017.
K, Kowsari, M. Papini, JK Spelt, Selective removal of metallic layers from sintered ceramic and metallic plates using abrasive slurry-jet micro-machining, Journal of Manufacturing Processes, accepted, Aug 2017.
Paper accepted
The following paper has been accepted for publication in the International Journal of Machine Tools and Manufacture:
J Schwartzentruber, JK Spelt, and M. Papini
Prediction of Surface Roughness in Abrasive Waterjet Trimming of Fiber Reinforced Polymer Composites
Paper accepted
The following paper has been accepted for publication in Precision Engineering:
F. Ahmadzadeh, S. S. H. Tsai, and M. Papini, Effect of curing parameters and configuration on the efficacy of ultraviolet light curing self-adhesive masks used for abrasive jet micro-machining
Paper accepted
The following paper has been accepted for publication in Precision Engineering:
K. Kowsari, J. Schwartzentruber, J.K. Spelt, M. Papini, Erosive Smoothing of Abrasive Slurry-Jet Micro-machined Channels in Glass, PMMA, and Sintered ceramics: Experiments and Roughness Model
Paper accepted
The following paper has been accepted for publication:
Y Li, A. Matinmanesh, DJ Curran, E Schemitsch, P Zalzal, M Papini, AW Wren & MR Towler, ‘Characterization and Fracture Property of Different Strontium-Containing Borate-Based Glass Coatings for Ti6Al4V Substrates’. J. Noncrys. solids. 458 (2017) 69-75.
Paper accepted
The following paper has been accepted for publication in the Journal of Materials Processing Technology:
M.R. Sookhak Lari, A. Ghazavi and M. Papini, A rotating mask system for sculpting of three-dimensional features using abrasive jet micro-machining