Author: mpapini

The following paper has been accepted for publication in Tribology International:
K. Kowsari, A. Nouhi, V. Hadavi, J.K. Spelt, and M. Papini, Prediction of the erosive footprint in the abrasive jet micro-machining of flat and curved glass.

The following paper has been accepted for publication in the Journal of Biomaterials Applications

Y. Li, W. Stone, E. H. Schemitsch, P. Zalzal, M. Papini, S D Waldman, M. R. Towler, Antibacterial and Osteo-stimulatory Effects of a Borate-based Glass Series Doped with Strontium Ions

The following paper has been accepted to International Journal of Machine Tools and Manufacture:

K. Kowsari, M. Papini, JK Spelt, The Effects of Fluid Vapor Pressure and Viscosity on the Shapes of Abrasive Slurry-jet Micro-machined Holes and Channels

The following paper has been accepted for publication in Powder Technology:
R. Jafar, V. Hadavi, J.K. Spelt, and M. Papini, Dust Reduction in Abrasive Jet Micro-machining Using Liquid Films.

The following paper has been accepted for publication in the Journal of Manufacturing Processes:

H. Nouraei, K. Kowsari, J.K. Spelt, and M. Papini, Calibrated CFD Erosion Modeling of Abrasive Slurry Jet Micro-machining of Channels in Ductile Materials

The following two papers have been accepted for publication in Wear:

V Hadavi, CE Moreno, M Papini, Numerical and Experimental Analysis of Particle Fracture during Solid Particle Erosion, Part I: Modeling and Experimental Verification

V Hadavi, CE Moreno, M Papini, Numerical and Experimental Analysis of Particle Fracture during Solid Particle Erosion, Part II: Effect of Incident Angle, Velocity and Abrasive Size

The following three papers have been accepted for publication:

A Nouhi, K Kowsari, J K Spelt, M Papini, Abrasive jet machining of channels on highly-curved glass and PMMA surfaces, accepted for publication in Wear.

MR Sookhak Lari, M Papini, Inverse methods to gradient etch three-dimensional features with prescribed topographies using abrasive jet micro-machining: Part I – Modelling, accepted for publication in Precision Engineering.

M R Sookhak Lari, M Teti, M. Papini, Inverse methods to gradient etch three-dimensional features with prescribed topographies using abrasive jet micro-machining: Part II – Verification with micro-machining experiments, accepted for publication in Precision Engineering

The following paper has been accepted and published:

A. Matinmanesh, O. Rodriguez, M.R. Towler, P. Zalzal, E.H. Schemitsch, M. Papini, Quantitative evaluation of the adhesion of bioactive glasses onto Ti6Al4V substrates, Materials and Design 97 (2016) 213–221.

Dr. Papini has agreed to serve as Associate Editor of Wear (http://www.journals.elsevier.com/wear/).

The following paper has been accepted for publication in Ceramics International:

K. Kowsari, H. Nouraei, B. Samareh, M. Papini, J.K. Spelt, CFD-aided Prediction of the Shape of Abrasive Slurry Jet Micro-machined Channels in Sintered Ceramics