The following paper was accepted for publication in Tribology Letters:
N. H. Arani, M. Eghbal, M. Papini, Numerical simulation of solid particle erosion of epoxy by overlapping angular particle impacts”
Author: mpapini
Paper accepted
The following paper has been accepted for publication:
D. Marx, A. Rahimnejad Yazdi, M. Papini, M. Towler, Review of the Latest Insights into the Mechanism of Action of Strontium in Bone, Bone Reports
Paper accepted
The following papers has been accepted in the Journal of Functional Biomaterials:
L. Hasanddost, O. Rodriguez, A. Alhalawani, P. Zalzal, E.H. Schemitsch, S.D. Waldman, M. Papini, M.R.Towler, The role of poly (methyl methacrylate) in management of bone loss and bone infection in revision total knee arthroplasty: a Review.
Paper accepted
The following paper has been accepted for publication in Precision Engineering:
The effects of blast lag in abrasive jet machined micro-channel intersections by S. Shafagh and M. Papini.
Paper accepted
The following paper has been accepted for publication in Materials Science & Engineering C:
Romina Shafaghi, Omar Rodriguez, Sunjeev Phull, Emil H. Schemitsch,
Paul Zalzal, Stephen D. Waldman, Marcello Papini, Mark R. Towler, Effect of TiO2 Doping on Degradation Rate, Microstructure and Strength of Borate Bioactive Glass Scaffolds
Paper accepted
The following paper has been accepted to the Journal of Functional Biomaterials:
Varinder P. S. Sidhu, Mark R. Towler, Marcello Papini *Measurement of adhesion of sternal wires to a novel bioactive
glass-based adhesive
Papers accepted
The following two papers have been accepted for publication:
R Shafaghi, P Zalzal, M Papini, S Waldman, E H Schemitsch, O Rodriguez, M. Towler,
A review of materials for managing bone loss in revision total knee arthroplasty, Materials Science & Engineering C, accepted July 2019.
E Azarsa, L Cinco, M.Papini, Fabrication of high aspect ratio free-standing structures using abrasive water jet micro-machining, Journal of Materials Processing Technology, accepted July 2019.
Paper accepted
The following paper has been accepted for publication in the International Journal of Machine Tools and Manufacture:
X. Luo, J. Palumbo, M. Papini, J.K. Spelt, Aerodynamic Focusing of an Abrasive Air Jet and its Effect on Machining Resolution
Papers accepted
The following papers have been accepted for publication in Precision Engineering:
Aria Ghazavi, Marcello Papini An Inverse Method for the Abrasive Jet Micro-machining of High Aspect Ratio Channels of Desired Topography – Part I, Theory
Aria Ghazavi, Marcello Papini, An Inverse Method for the Abrasive Jet Micro-machining of High Aspect Ratio Channels of Desired Topography – Part II, Experiments
Paper accepted
The following paper has been accepted for publication in Tribology International:
N.H. Arani, W. Rabba, and M. Papini, Solid particle erosion of epoxy matrix composites reinforced by Al2O3 spheres